![]() This is relatively easy to do but does require an additional purchase of an adapter. ![]() And 256 GB SSD for anything bigger your 4 to 10 TB drives.Īnd finally you can replace the optical drive with a 2.5 drive. When doing these types of DIY Fusion Drives I recommend a 128 GB SSD when you’re using a spinning hard drive with the capacity between 1 to 3 TB. If you’re running one of the later versions of the operating system you can use the slot to DIY a Fusion Drive. However OWC sells the kit including the cables for this however you will need to remove the computers logic board to do this upgrade. In less you purchased this upgrade when you purchased your machine the cables are missing. ![]() This was way before Fusion Drive came along. Second drive is a 2.5, and was intended for an SSD ad on sold separately where Apple would install you a second SSD for the operating system. The software can be more of a problem and requires you to always find and maintain it where the sensor can be set and forget. Firstly let me start by reminding you or letting you know in case you didn’t the 20 iMac’s Supports up to 3 hard drives internally.Ī 3.5, The main drive and yes this model does require a thermal sensor (preferred) but you could use fan control software. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |